Jonsered HT 2121 Instruction Manual download pdf (Page 2)

-- 2 --

SAFETY RULES

WARNING:

Failure to follow all

Safety Rules and Precautions can result in

serious injury.

DANGER:

THIS POWER TOOL CAN

BE DANGEROUS!

This unit can cause serious

injury including amputation or blindness to the

operator and others. The warnings and safety

instructions in this manual must be followed to

provide r easonable safety and efficiency in us-

ing this unit. The operator is responsible for fol-

lowing the warnings and instructions in this

manual and on the unit. Never allow children to

use this tool.

KNOW YOUR UNIT

Read your instruction manual carefully until

you completely understand and can follow

all warnings and safety rules before operat-

ing the unit.

Restrict unit to users who understand and

will follow all warnings and safety rules in

this manual and on the unit.

PLAN AHEAD

WARNING:

Inspect area before start-

ing unit. Remove all debris and hard objects

such as r ocks, glass, wire, etc. that can rico-

chet, be thrown, or otherwise cause injury or

damage dur ing operation.

Always wear eye protection when operating,

servicing, or perform ing maintenance on unit.

Wear ing eye protection will help to prevent

brush or debr is from being thrown or ricochet-

ing into eyes and face w hic h can resu lt in

blindness and/or serious injury . Eye pr otec-

tion should be marked Z87.

Wear hearing protection when using this

unit.

Secure hair above shoulder length. Secure

or remove jewelry, loose clothing, or cloth-

ing with loosely hanging straps, ties, tas-

sels, etc. They can be caught in moving

parts.

Stay alert. Do not operate unit when you are

tired, ill, upset, or if you are under the influence

of alcohol, drugs, or medication.

Keep children, bystanders, and animals

away from work area a minimum of 30 feet

(10 meters) when starting or operating unit.

HANDLE FUEL WITH CAUTION

Eliminate all sources of sparks or flame (in-

cluding smoking, open flames, or work that

can cause sparks) in the areas where fuel is

mixed, poured, or stored.

Mix and pour fuel in an outdoor area; store

fuel in a cool, dry, well ventilated place; use

an approved, marked container for all fuel

purposes.

Do not smoke while handling fuel or while

operating the unit.

Do not fill fuel tank while engine is running.

Make sure the unit is properly assembled

and in good operating condition.

Avoid spilling f uel or oil. Wipe up fuel spills

before starting the engine.

Move at least 10 feet (3 meters) away from

fuel and fueling site before starting engine.

Always store gasoline in a container ap-

proved for flammable liquids.

OPERATE YOUR UNIT SAFELY

DANGER:

RISK OF CUT; KEEP

HANDS AWAY FROM BLADE

--Blade

moves momentarily after the trigger is re-

leased. Do not attempt to clear away cut ma-

terial when the blade is in motion. Make sure

the switch is in the OFF position, the spark

plug wire is disconnected, and the blade has

stopped moving before removing jammed

material from the cutting blade. Do not grab or

hold the unit by the cutting blade.

Inspect unit before each use for worn,

loose, missing, or damaged parts. Do not

use until unit is in proper working order.

Keep outside surfaces free from oil and

fuel.

Never start or run engine inside a closed

room or building. Breathing exhaust fumes

can kill.

Avoid dangerous environments. Do not use

in unventilated areas or where explosive

vapors or carbon monoxide build up could

be present.

Do not overreach or use from unstable sur-

faces such as ladders, trees, steep slopes,

rooftops, etc. Keep firm footing and balance

at all times.

Do not raise unit above your shoulders; the

cutting blade can come dangerously close

to your body.

Always keep unit in front of your body. Keep

all parts of your body away from the cutting

blade.

Keep the cutting blade and air vents free

from debris.

Use only for jobs explained in this manual.

MAINTAIN YOUR UNIT PROPERLY

Have all maintenance other than the rec-

ommended procedures described in the in-

struction manual performed by an autho-

rized service dealer.

Disconnect spark plug before performing

maintenance except for carburetor adjust-

ments.

Do not use a cutting blade that is bent,

warped, cracked, broken, or damaged in

any other way. Have worn or damaged

parts replaced by an authorized service

dealer.

Use only recommended Jonsered

cutting

blades and replacement parts; use of any

other parts may void your warranty and

cause damage to your unit.

Empty fuel tank before storing the unit. U se

up fuel left in carburetor by starting engine and

letting it run until it stops .

Hand carry the unit with the engine stopped

and the muffler and cutting blade away from

your body.

Allow engine to cool, empty the fuel tank,

and secure the unit before storing or trans-

porting it in a vehicle.

1 2 3 4 5 6 7 ... 28 29

Comments to this Manuals

No comments

Jonsered HT 2121 Instruction Manual Page 2

Comments to this Manuals

Related products and manuals for Grass trimmers Jonsered HT 2121