Jonsered GC2236 User Manual

English GC2236 Operator ′ s manual Please read the oper ator’s manual carefully and make sure you understand the instructions before using the mac

GENERAL SAFETY PRECAUTIONS10 – EnglishLocking nutA locking nut is used to secure some types of cutting attachment.When fitting, tighten the nut in the

GENERAL SAFETY PRECAUTIONSEnglish – 11General rulesOnly use cutting attachments with the guards we recommend! See the chapter on Technical data.Keep t

ASSEMBLY12 – EnglishFitting the J-handle • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaf

ASSEMBLYEnglish – 13Fitting the guard extensionCAUTION! The guard extension shall always be fitted when using the trimmer head/plastic blades and comb

ASSEMBLY14 – EnglishFitting other guards and cutting attachments• Fit the trimmer guard/combination guard (A) intended for use with the trimmer head/p

FUEL HANDLINGEnglish – 15Fuel safetyNever start the machine:1 If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporat

FUEL HANDLING16 – EnglishMixing• Always mix the petrol and oil in a clean container intended for fuel.• Always start by filling half the amount of the

STARTING AND STOPPINGEnglish – 17Check before starting• Check the blade to ensure that no cracks have formed at the bottom of the teeth or by the cent

STARTING AND STOPPING18 – EnglishChoke: Set the choke control in the choke position. Hold the body of the machine on the ground using your left hand (

WORKING TECHNIQUESEnglish – 19General working instructionsBasic safety rules1 Look around you:• To ensure that people, animals or other things cannot

KEY T O SYMBOLS 2 – English Symbols W ARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in s

WORKING TECHNIQUES20 – EnglishBasic working techniquesAlways slow the engine to idle speed after each working operation. Long periods at full throttle

WORKING TECHNIQUESEnglish – 21Cutting• The trimmer is ideal for cutting grass that is difficult to reach using a normal lawn mower. Keep the cord paral

MAINTENANCE22 – EnglishCarburettorYour Jonsered product has been designed and manufactured to specifications that reduce harmful exhaust fumes. The eng

MAINTENANCEEnglish – 23Low speed jet LTry to find the highest idle speed by turning the low speed jet L clockwise then anti-clockwise. When the highest

MAINTENANCE24 – EnglishMufflerCAUTION! Some mufflers are fitted with a catalytic converter. See chapter on Technical data to see whether your machine is

MAINTENANCEEnglish – 25Air filterThe air filter must be regularly cleaned to remove dust and dirt in order to avoid:• Carburettor malfunctions• Starting

26 – EnglishMAINTENANCEMaintenance scheduleThe following is a list of the maintenance that must be performed on the machine. Most of the items are des

English – 27TECHNICAL DATATechnical dataNote 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/

28 – EnglishTECHNICAL DATA EC-declaration of conformity(Applies to Europe only)We, Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, decla

1Poly Trim2345678<20mm>20mm!BA6 NmX 10

CONTENTS English – 3 Contents Note the f ollowing before starting: Please read the oper ator’s manual carefully. KEY TO SYMBOLS Symbols ...

"Clic"12356710118,5 m28'484,2 m14'2,4-2,7 mm.095-.106"10 cm 4"6"15 cmS35

12432,4-2,7 mm.095-.106"4,25 m14'4,25 m14'B6"15 cmA6"15 cmS355

Tap n’ Go 35 Spin"Clic"12356798,5 m28'484,3 m14'2,4-2,7 mm.095-.106"10 cm 4"6"15 cm

"Clic"123567910 m32'484,3 m14'2,7-3,3 mm.106-.13"10 cm 4"6"15 cmTap n’Go 45 Spin

1151216-26´®z+S5^¶64¨´®z+S5^¶64¨2008-05-30

4 – English INTR ODUCTION Dear Customer , Cong ratulations on your choice to buy a Jonsered product!We are convinced that you will appreciate with

English – 5 WHA T IS WHA T? What is what on the brushcutter?3231302323252627282429 1 Trimmer head2 Grease filler cap, bevel gear3 Bevel gear4 Cutti

GENERAL SAFETY PRECA UTIONS 6 – English Impor tant Personal protective equipment HELMET A protectiv e helmet where there is a risk of falling objec

GENERAL SAFETY PRECA UTIONS English – 7 BOO TSWear boots with steel toe-caps and non-slip sole.CLOTHINGWear clothes made of a strong fabric and av

GENERAL SAFETY PRECA UTIONS 8 – English be chec ked. See instructions under the heading Maintenance. Stop switchUse the stop switch to switch off t

GENERAL SAFETY PRECAUTIONSEnglish – 9MufflerThe muffler is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user. A